Storage Tank Wall Roll Forming Machine | 4mm Steel Wall Panel Production Line
Roll forming machine for production 6mm thickness Silo Wall sheet profiles 4mm
The Steel Corrugated Wall Sheet produced by the roll forming line is also named Storage Tank corrugated wall, this profile is used for making silo wall. 4mm thickness material can be processed by this machine. The Silo Wall Sheet Roll Forming Machine is consisted un-coiler, entrance, main roll former for processing corrugated steel sheets, servo control feeder and hydraulic punching holes device, three roller bending device. The arc panel can be formed by this line at one time. The storage tank walls profile can be custom made according to request. Compared the traditional way, the advantage of the cutter after bending is to more efficient, and more beautiful profile can be obtained.
Silo Wall Sheet Machine Technology specifications
Silo Wall Sheet Roll Forming Machine consists of Uncoil device, Roll forming machine, Hydraulic punching device, three roller bending device, cutter and run-out table, PLC automatic control system, etc. The Silo Wall Sheet Roll Forming Machine technology Flow is as following,
Manual De-coiler (5Ton) --- feeder + leveler + Roll forming Machine ---- Servo Tracing punching (Side holes + Cross holes) --- hydraulic cutter (Stop-cut) ------ corrugated sheet bending -- finished products
Auto Production line Main Parameters
| Item |
Content |
| Raw material |
- Thickness 2 - 6mm;
- Coil width is according to client profile
- Yield Strength ≤300MPa
|
| De-coiler |
- Capacity: 10Tons
- Inner extending cantilever style, manual control,
- Coil ID: 470mm-510mm; Coil OD:1300mm
|
| Main roll former |
- Roll station:18stations
- Material of main shaft ¢155mm, 45#, treating
- Forming rollers GCR15, quenching, hardness HRC58-62º, chrome plated
- Driving model: By gearing box driving system, 200*500
- Main motor power: 55kw
- Working speed: 0-15m/min, not including punching and cutting
|
| Hydraulic punching |
- Side holes + Cross holes;
Servo Tracing punching model; 11KW (+ accumulator ) / 25Mpa
|
| 3 Roller Bender |
- Corrugated steel sheet 3 roller Bending; shaft diameter 180mm
UP shaft 1 pc; Down shaft 2pcs
- Power: main motor 30kw; adjustment motor 3kw
- Roller material GCR15
- Driving model: By Double line chain
|
| Cutter |
- Stationary Hydraulic Cutter
- Cr12MoV, quenching and hardness 58°-62°
|
| Controlling system: |
PLC & Touch screen |
| Total weight: |
About11,000kg |
| Size |
18500×1500×1200mm |
Application sample- Grain silos tank
Product Tags:
|
|
4mm Storage Rack Roll Forming Machine Steel Wall Panel Production Line 55kw Images
|
